||Sanitary Butterfly Valves Thread/Sight Glass End With Manual Handle
||Stainless Steel 304/316L
||EPDM, VMQ(Silicone), NBR(Nitrile), VITON, all meet FDA standard
||15°F to 200°F(-9.4°C to 93°C) EPDM
||10bar (140psi) DN25 ~ 100; 8bar (120psi) DN125 ~ 150
||Ra 16 ~ 32µin (0.4 ~ 0.8µm) electropolish available
||1/2” -- 12”
||Tri-clamp ferrule; Threaded; Welded
||3A , SMS , ASME BPE, ISO, DIN, BS
||100% hydraulic tested / 100% inspected
||Can see our products catalogues
||Food process, Milk process, Beer brewage, Bio-pharmacy, etc.
||Carton packaging. Wooden case packaging.
||Air shipment, Ocean shipment, DHL/UPS available. Up to requirement.
||T/T, L/C, West Union, Paypal
QILI is your source for a SS304 and SS316L Clamp Four Position
Butterfly Valve to service the Bakery, Beverage, Cosmetic, Dairy, Food
and Pharmaceutical Industries.
As you examine this valve with the pictures provided, look at the
Our sizes ( 1" -- 6" ) valve is designed with (4) four positions so you can
slowly open the valve and create less stress on the valve seat versus the
open and close style of valve. Upon opening the valve, you have the option
of two other positions for more or less flow depending on your needs.
Since the valve comes standard with a clamp end, it is easy to assemble
and disassemble when cleaning or working in a tight space.
We have provide a Black or blue Ball attached to the pull handle and
interchangeability of the Handle to either side when placed in an area where
a wall could be a problem and you can not open and close the valve.
QILI's Clamp Four Position Butterfly Valve is 100 percent Hydraulic
Pressure Tested and 100 percent inspected, no special tools needed in the
field to work on the valve, Silicone seats are standard. Check out the line
space of each size of the valve and you will see that it matches with a few
of the major competitors.
As for the finish and all wetted surface, the sanitary finish is to a 25 Ra or
better. We have each valve capped and bagged so you have no dings on the
ends as well as permanently etching the size, alloy and heat number for full